Diffuse Reflectance Spectroscopy Research Articles

Uranium Oxide Hydrate Frameworks with Dy(III) or Lu(III) Ions: Insights Into the Framework Structures With Lanthanide Ions.

Two uranium oxide hydrate frameworks (UOHFs) with either Dy3+ or Lu3+ ions, Dy1.36(H2O)6[(UO2)10UO13(OH)4] (UOHF-Dy) or Lu2(H2O)8[(UO2)10UO14(OH)3] (UOHF-Lu), were synthesized hydrothermally and characterized with a range of structural and spectroscopic techniques. Although SEM-EDS analysis confirmed the same atomic ratio of ~5.5 for U : Dy and U : Lu, they displayed different crystal morphologies, needles for UOHF-Dy in the orthorhombic C2221 space group and plates for UOHF-Lu in the triclinic P-1 space group. Both frameworks are composed of β-U3O8 type layers linked by pentagonal bipyramidal uranium polyhedra, with the Dy3+/Lu3+ ions inside the channels. However, the arrangements of Dy3+/Lu3+ ions are different, with disordered Dy3+ ions well aligned at the centers of the channels and single Lu3+ ions well-separated in a zigzag pattern in the channels. While the characteristic vibrational modes were revealed by Raman spectroscopy, the presence of a pentavalent uranium center in UOHF-Lu was confirmed with diffuse reflectance spectroscopy. The formation of two types of UOHFs with lanthanide ions, high or low symmetry, and the structure trend were discussed regards to synthesis conditions and lanthanide ionic radius. This work highlights the complex chemistry driving the formation of UOHFs with lanthanide ions and has implications to the spent nuclear fuel under geological disposal.

Remediation of methylene blue water solution with iodine doped TiO2 nanoparticles and their regeneration: For reuse and check phytotoxicity level of treated water

Titanium dioxide (TiO2) is an essential metal-oxide semiconductor with unique features, such as low cost, photostability, nontoxicity, and abundance used as a photocatalyst. However, TiO2's photocatalytic activity is limited because it exclusively absorbs incoming light in the ultraviolet (UV) range. In present work, Iodine-doped TiO2 (IDT) photocatalysts were prepared employing solution-combustion process in various mol % of iodine (I), i.e., Ti1-xIxO2 (x = 0.00–0.05). Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV–Vis Diffuse Reflectance spectroscopic (DRS) were used to characterise the synthesised IDT. DRS indicated that iodine doping increased the absorbance range while diminishing its bandgap energy. As the I doping concentration in TiO2 increased, there was a constant shift in absorbance towards the visible light area. The XRD demonstrated that the prepared photocatalysts were solely with the anatase phase of TiO2. The FTIR identified the functional groups in the prepared photocatalysts and numerous Ti–O lattice stretching and bending vibrational bands. Photocatalytic degradation of methylene blue (MB) dye was tested in a UV photochemical reactor. The 3 % IDT photocatalyst has the highest photodegradation efficiency amid all the prepared pristine and IDT photocatalysts. Regarding dye photodegradation, the synthesised TiO2 photocatalyst doped with 3 % Iodine outperformed the commercially available Aeroxide P-25 photocatalyst. Furthermore, the nanoparticles demonstrated excellent reusability in regeneration trials. A study on the germination of "Vigna Radiata" was done to determine phytotoxicity as part of the investigation into the potential use of photocatalytically treated water in irrigation. The phytotoxicity evaluation results show that the treated water has potential for use in irrigation.

Utilizing banana peel in conjunction with TiO2 photocatalyst for the efficient decolorization of malachite green

Porous materials are frequently integrated into TiO2 photocatalysts due to their enhanced surface area and reaction efficiency. This study aimed to enhance the efficiency of wastewater treatment by developing a TiO2 combined with banana peel (BP) through the sol-gel method. The TiO2/BP composite was extensively analyzed using a range of methods, such as X-ray diffraction (XRD), field emission transmission electron microscopy (FESEM), energy dispersive X-ray (EDX) analysis, diffuse reflectance spectroscopy (DRS UV–vis), photoluminescence spectra (PL), and Brunauer–Emmett–Teller (BET) analysis. Subsequent evaluation of the photoactivity of the TiO2/BP composite compared to bare TiO2 particles revealed a noteworthy enhancement in decolorizing malachite green (MG) dye under visible light. Furthermore, recyclability testing further demonstrated consistent performance for up to four cycles, highlighting the potential application of this porous material-based photocatalytic composite in wastewater treatment.

Optical and morphological studies of Titania nanotubes by varying anodization parameters

In this study, the self-organized Titania (TiO2) was created by anodizing pure titanium in a mixture of ethylene glycol, ammonium fluoride, and distilled water using an electrochemical cell. This study aims to examine how changes in anodization parameters impact the morphology and optical properties of Titania. The nanotubes achieved 10 μm length by applying less ammonium fluoride (NH4F) electrolytes. The energy dispersive X-ray spectroscopy (EDX) reveals that the prepared samples are essentially composed of TiO2. Mixed phases of rutile and anatase are obtained by increasing the annealing temperature from 360 to 480 ℃ and crystalline size seems to be reduced by increasing anodization potential, calculated by X-ray diffraction analysis (XRD), diffuse reflectance spectroscopy (DRS) helps to identify the bandgap value and the minimum value attained at 2.56 eV without doping and the electron-hole recombination rates calculated through the intensity of photoluminescence (PL) analysis. Ultimately, the optimal values of the anodization parameters for the generation of the most effective sample are determined.

The Synthesis of Ag/TiO2 via the DC Magnetron Sputtering Method and Its Application in the Photocatalytic Degradation of Methyl Orange in Na2SO4 Solution

TiO2 and TiO2 films modified with Ag (Ag/TiO2) were prepared via the DC magnetron sputtering method and the degree of modification was controlled via the sputtering power and time of Ag. The microstructures and properties of these films were characterized using field emission scanning electron microscopy, X-ray diffractometry, ultraviolet–visible diffuse reflectance spectrometry, atomic force microscopy, and X-ray photoelectron spectroscopy (XPS). The results show that the prepared films have an anatase structure. Compared with pure TiO2, Ag deposition can improve the utilization of light. The three-dimensional images of Ag/TiO2 clearly show that with the increase in Ag sputtering power and sputtering time, Ag particles on the surface of the film gradually increase, and the structure of the film is relatively dense. The photocatalytic effect of Ag/TiO2 films is the best when the Ag sputtering power is 5 W and the sputtering time is 50 s. Under high-pressure mercury lamp irradiation, the photocatalytic degradation rate of methyl orange (MO) in pure MO solution with Ag/TiO2-5 W-50 s can reach 100% within 55 min, whereas that in MO-Na2SO4 mixed solution can reach 99.55% within 65 min. The results suggest that the presence of Na2SO4 in MO solution can inhibit the degradation of MO using Ag/TiO2, the result of XPS suggests that Na2SO4 accelerates the oxidation of Ag, which may lead to an increase in the recombination rate of photogenerated electron–hole pairs and a decrease in the degradation rate. During the process of recycling photocatalysts, the degradation rate of MO was apparently reduced. A possible reason is that the Ag particles have been oxidized and products of photocatalytic degradation are on the surface of the photocatalyst. The photocatalytic degradation mechanism was studied.

Activity, stability, and kinetic study of CuO/TiO2 Janus photocatalyst for Rhodamine B degradation

ABSTRACT The CuO/TiO2 photocatalyst was synthesized using hydrothermal and sonochemical methods and subsequently applied to degrade rhodamine B in wastewater. The best synthesis conditions were established, determining Cu(NO3)2 solution concentration of 2.5 wt.% and calcination temperature of 500 °C. The CuO/TiO2 photocatalyst underwent characterization through various techniques, including ICP, photoluminescence, X-ray diffraction, ASAP, scanning electron microscope (SEM), EDAX, transmission electron microscopy (TEM), and diffuse reflectance spectroscopy. TEM and SEM analyses revealed the presence of TiO2 nanowires and CuO nanoparticles. The Box–Behnken design, encompassing 27 experimental runs, assessed the impact of process variables such as initial dye concentration, pH, UV lamp power, and catalyst dose on the degradation process. The model's R2 value of 0.9893 indicated a high precision in fitting the predicted data to their actual values. Analysis of variance results highlighted UV irradiation power as the most significant variable within the design space. In addition, the CuO/TiO2 photocatalyst demonstrated efficacy under visible light irradiation. Light-expanded clay aggregate beads were chosen as the substrate for photocatalyst immobilization, which enhanced the reaction rate. The stability of CuO/TiO2 was evidenced by about 2% reduction in efficiency after four degradation cycles.

Pt Nanoparticles Embedded Polypyrrole‐Carbon Black/SrSnO3 Photocatalyst with Stable and Superior Photodegradation Performance

AbstractCurrently, the primary focus for scientific authorities and regulatory departments revolves around water pollution. In this regard, photocatalysis has emerged as a highly effective, affordable, and goal‐oriented approach. Thus, recognizing the urgency of this issue, we focused our efforts towards developing a novel ternary photocatalytic structure based on mesoporous SrSnO3, combined with polypyrrole‐doped carbon black (PPC) and platinum nanoparticles (Pt NPs). Pt NPs, PPC and SrSnO3‐based nanocomposite photocatalyst was developed through a very simple chemical method followed by ultrasonication and photoreduction techniques. XRD analysis confirmed orthorhombic phase of SrSnO3, while the formation of the ternary nanocomposite among Pt NPs, PPC and SrSnO3 has been confirmed by X‐ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) revealed the presence of Pt NPs (5–15 nm), beads/dense cocoon like structures of PPC along with rod, spherical and needle shape nanostructures of SrSnO3 in newly created ternary photocatalyst. Diffuse reflectance spectroscopy (DRS) showed lowering of band gap energy in case of Pt@PPC/SrSnO3. Newly developed Pt@PPC/SrSnO3 nanocomposite worked efficiently when employed on colorless insecticide imidacloprid (IMD) and on colored methylene blue (MB) dye under UV‐light. Pt@PPC/SrSnO3 photocatalyst exhibited excellent performance with 96.03 % removal of pollutant IMD in only 20 min, almost 296 % more efficient than bare SrSnO3. Furthermore, the Pt@PPC/SrSnO3 ternary photocatalyst showed rapid removal of MB with almost total elimination of dye molecule in just 16 min.

Eco-Friendly Production of Metal Nanoparticles Through Plant Extract Besides Their Assessment of Antibacterial, and Antifungal activity

A green-synthesis method for silver nanoparticles (Ag NPs) is a scientific breakthrough. Using sunflower plant extracts, this approach uses metallic and botanical synergy. Naturally occurring and renewable extracts reduce, chelate, stabilize, bind, and precipitate. The Ag nanoparticles' X-ray diffraction (XRD) crystal structure was cubic. Average nanoparticle crystallite size was 31.18 nm. Energy-dispersive X-ray spectroscopy (EDX) detected silver. Field Emission Scanning Electron Microscope (FESEM) examination revealed that the particles were Ag (silver) and spherical, averaging 31.23nm. Diffuse Reflectance Spectroscopy also indicated a 2.7 eV optical gap. Using many characterization methods, nanostructured silver was synthesized during this procedure. Biological efficacy assays can evaluate hierarchically porous silver's antibacterial properties. In the previous five years, strategies against Staphylococcus aureus, Pseudomonas aeruginosa, Streptococcus mutans, Ecoli, and Candida albicans, Penicillium spp., and Aspergillus spp. were essential. Data demonstrates that these structures are attractive antibacterial choices. A majority of Ag NPs are natural bacterium substitutes for Staphylococcus aureus, pseudomonas aeruginosa, Streptococcus mutans, and Ecoli. Also against various fungi: The immune systems of immunocompromised hosts are threatened by yeasts such Candida albicans, Penicillium, and Aspergillus.measured. It calls into doubt the study's efficacy in antibacterial and other applications.

Authentication of oats and discrimination from their gluten-containing adulterants using NIR diffuse reflectance spectroscopy and multivariate analysis

Oat (Avena sativa L.) is recognized for its nutritional value and gluten-free status, however, ensuring its authenticity and purity is crucial, given the potential for contamination with gluten-containing grains. In this study, near-infrared spectroscopy coupled with chemometrics were employed to authenticate oat flour (from different forms of oat; oat groats, steel-cut and rolled oats) and distinguish it from common gluten-containing adulterants including wheat, farro, triticale, barley, rye, and ryegrass. Both unsupervised and supervised chemometric methodologies, encompassing PCA, SIMCA, and OPLS-DA, were applied. Both SIMCA and OPLS-DA models displayed 100% sensitivity, enabling reliable identification of oat flour and detection of potential adulteration with these gluten-containing grains with specificity of 97.78% and 100%, respectively. In the SIMCA model for oat groats and adulterated mixtures, samples with 1% and 2% adulteration were incorrectly classified as oat groats, yet successful discrimination from deliberately-adulterated mixtures was accomplished through the OPLS-DA model with 100% specificity. Moreover, PLS regression analysis was employed to precisely quantify the levels of adulterants in oat groats flour. The models exhibited reliable performance, as reflected in Root Mean Square Error of Calibration (RMSEC) values. Validation of these models using test samples provided further confirmation of their efficacy in detecting sample adulteration and ensuring product authenticity, all while maintaining a high sample throughput rate.

Experimental and Theoretical Insights on the Structural, Electronic, and Magnetic Properties of the Quaternary Selenides EuPrCuSe3 and EuNdCuSe3.

Magnetic semiconductors EuPrCuSe3 and EuNdCuSe3 were obtained by using the halide flux method. Their crystal structures and magnetic properties were studied and discussed. Optical properties of the obtained selenides were studied by the means of diffuse reflectance spectroscopy, which revealed the values of 1.92/1.97 and 0.90/0.94 eV for the direct and indirect band gaps of Ln = Nd/Pr, respectively. The structural, electronic, and magnetic properties of the obtained compounds were additionally studied with spin-polarized density functional theory calculations, wherein both systems were found to be two new examples of semiconducting quaternary selenides with disperse conduction bands of Nd/Pr 5d character. The modeling showed that various magnetic orderings in the systems have subtle influences on the alignments/overlaps between the Se/Cu, Eu, and Pr/Nd bands, and that the spin-state energetics are very dependent upon the treatment of electron correlation, but a distinguishing feature in the case of ferromagnetic coupling is that the spin density on the Se atoms is maximized. Overall, the calculations are in good agreement with the experimental characterization of ferromagnetism in the bulk crystals, wherein the ferromagnetic transition occurs at temperatures of about 2.5 K for EuPrCuSe3 and about 3 K for EuNdCuSe3.

Synthesis and Characterization of (CdO- CuOCo3O4) Mixed Metal Oxides Nanocomposite

Synthesis and Characterization of (CdO- CuOCo3O4) Mixed Metal Oxides Nanocomposite

Antibacterial and antiviral PA6-AgNPs microfibers for application as a filter element in facial respirators

Polymeric microfibers are very interesting materials that can be associated with other nanomaterials aiming to obtain specific properties and be used in a wide range of applications. In this study, we prepared different formulations of polyamide 6 (PA6) containing silver nanoparticles (AgNPs) and produced microfibers by solution blow spinning technique for its use as a filter element in a face respirator. The obtained samples were then characterized by field emission gun-scanning electron microscopy (FEG-SEM), energy dispersion spectroscopy (EDS), ultraviolet–visible diffuse reflectance spectroscopy (UV–Vis DRS), water contact angle (WCA), thermogravimetric analysis (TGA), and respirability and antibacterial, antiviral and cytotoxicity assays. In general, the microfibers were well dispersed and the AgNPs were evenly distributed throughout the samples, reflecting a hydrophilic character and good thermal stability, with a maximum weight loss of 2.9 % attributed to the evaporation of water molecules. The sample produced with a concentration of 10 mmol/L of silver nitrate presented acceptable levels of resistance to respiration. Concerning the microbiological analyses, the results showed that samples evidenced antibacterial effect against Escherichia coli and Staphylococcus aureus, forming inhibition halos of up to 4 mm in disk diffusion assays and inhibiting bacterial growth in liquid medium assays, as well as antiviral effect against betacoronavirus MHV-3, promoting a reduction of up to 99.9 % of viral particles. Moreover, the samples presented cytotoxicity on the first and second days, whereas on the seventh day some of the extracts did not show cytotoxic activity, indicating that the cells adapted to the culture medium. Considering the data set and the simple process of obtaining the microfibers, it was possible to conclude that this material can be applied as a filter element in a face respirator as well as in a variety of products with antibacterial and antiviral purposes.

Photocatalytic Degradation of Tartrazine and Naphthol Blue Black Binary Mixture with the TiO2 Nanosphere under Visible Light: Box-Behnken Experimental Design Optimization and Salt Effect

In this study, TiO2 nanospheres (TiO2-NS) were synthesized by the solvothermal method. Firstly, the synthesized nanomaterial was characterized by X-ray diffraction (XRD), Fourier Transformed Infrared (FTIR), scanning electron microscopy (SEM) and UV-Vis Diffuse Reflectance Spectroscopy (DRS). To study the photocatalytic degradation of Tartrazine (TTZ) and Naphthol Blue Black (NBB) in a binary mixture, the influence of some key parameters such as pH, pollutant concentration and catalyst dose was taken into account under visible and UV light. The results show a 100% degradation efficiency for TTZ after 150 min of UV irradiation and 57% under visible irradiation at 180 min. The kinetic study showed a good pseudo-first-order fit to the Langmuir–Hinshelwood model. Furthermore, in order to get closer to the real conditions of textile wastewater, the influence of the presence of salt on TiO2-NS’s photocatalytic performance was explored by employing NaCl as an inorganic ion. The optimum conditions provided by the Response Surface Methodology (RSM) were low concentrations of TTZ (2 ppm) and NBB (2.33 ppm) and negligible salt (NaCl) interference. The percentage of photodegradation was high at low pollutant and NaCl concentrations. However, this yield became very low as NaCl concentrations increased. The photocatalytic treatment leads to 31% and 53% of mineralization yield after 1 and 3 h of visible light irradiation. The synthesis of TiO2-NS provides new insights that will help to develop an efficient photocatalysts for the remediation of contaminated water.

Visible-light-driven photocatalytic degradation of doxycycline using TiO2/g-C3N4/BIOCHAR catalyst

Abstract TiO2/g-C3N4/biochar (TCNBC) catalysts were prepared by the hydrolysis method for the photocatalytic degradation of doxycycline antibiotic (DC), with biochar obtained from the pyrolysis of Phragmites australis. The catalysts were examined using scanning electron microscope (SEM), transmission microscopy (TEM), energy dispersive X-ray spectrometer (EDX), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), photoluminescence spectroscopy (PL), and ultraviolet-visible diffuse reflectance spectroscopy (UV–Vis DRS) and nitrogen adsorption/desorption. The photocatalytic activity results showed that the TCNBC catalyst exhibited higher catalytic activity than pure TiO2 or g-C3N4. Its peak catalytic activity, achieving a decomposition efficiency of 91.93% and a mineralization efficiency of 81.50%, can be attributed to the synergistic effect of biochar, TiO2, and g-C3N4. Even after four cycles of use, the catalyst still maintained relatively high activity for the degradation of DC. The photocatalytic degradation efficiency of TCNBC decreased from 91.93% to 86.30% after four recycling events.

Preparation, characterization and photocatalytic studies of defect pyrochlore, KMn0·33Te1·67O6 and its composite with g-C3N4

Skeletal materials belonging to the defect pyrochlore family have been the subject of considerable interest due to their remarkable properties. In this work, a highly efficient, stable and visible light active composite photocatalytic system consisting of defect pyrochlore of composition KMn0·33Te1·67O6 (KMnTeO) and g-C3N4 (g-CN) has been successfully prepared by simple physical mixing of pre-prepared KMnTeO and g-CN components synthesized in solid state and thermal treatment of low-cost melamine, respectively. Structural, morphological and optical properties of as-prepared catalysts were deduced from powder X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR), Raman, Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (FESEM-EDX), Transmission Electron Microscopy-High Resolution Transmission Electron Microscopy (TEM-HRTEM), Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV–Vis DRS), X-ray Photoelectron Spectroscopy (XPS) and Photoluminescence (PL) measurements. The lattice parameter “a” of parent KMnTeO was obtained from Rietveld refinement of its powder XRD pattern. The FT-IR and Raman spectra of KMnTeO gave characteristic bands belonging to the defect pyrochlore structure. The photocatalytic activities of KMnTeO and composite KMnTeO-g-CN were evaluated by the degradation of methylene blue (MB). Scavenger experiments were carried out to identify the reactive species responsible for the degradation of MB. Furthermore, the reusability and stability of the photocatalysts were explored. The probable photocatalytic mechanism for MB degradation over the composite KMnTeO-g-CN was surmised according to the scavenger experiments. The work provides a new approach for the development of novel defect pyrochlore based composite photocatalysts to treat industrial wastewater containing organic pollutants.

Eco-friendly synthesis of novel magnesium oxide nanomaterials for dye degradation, battery, and sensor applications

Nowadays green synthesis is being incorporated into various technological fields to achieve more sustainable and environmentally friendly processes. By reducing the use of hazardous chemicals, minimizing waste generation, and utilizing renewable resources, green synthesis offers potential solutions to address environmental concerns and promote sustainable development in technology sectors. Herein we demonstrate an environmentally friendly green approach for the fabrication of MgO nanoparticles by using various fruit extracts. In this current study, watermelon, Aloe vera, and Jamun fruit extracts are used as fuel for the synthesis of MgO nanomaterials. Prepared materials were characterized by various characterization techniques. Scanning electron microscopy (SEM) images demonstrate the porous nature of the material and the Diffused reflectance spectroscopy (DRS) reveals the energy gap (4.8–4.9 eV) of the material. Photocatalytic degradation of Direct Green (DG) dye was evaluated under UV light irradiation and the catalyst prepared via jamun fuel (MgO-J) exhibited excellent catalytic activity at 84% for the degradation of DG dye under UV light and better electrochemical behavior as an electrode material compared to other prepared materials. This present work demonstrates a highly efficient eco-friendly route to synthesize MgO nanoparticles for multifunctional applications and also encourages sustainable development in technology areas.

Past, Present, and Future Diagnostic Methods for the Early Noninvasive Detection of Oral Premalignant Lesions: A State of the Art and Systematic Review.

Objectives: To provide an in-depth analysis of noninvasive methods for the early diagnosis of oral premalignant lesions, focusing on novel biomarkers and optical technologies, and to discuss their potential in improving the prognosis of patients with oral oncological diseases. Methods: This state-of-the-art review examines various noninvasive diagnostic techniques, including the utilization of salivary microRNAs and optical technologies such as Raman spectroscopy, elastic scattering spectroscopy, diffuse reflectance spectroscopy, narrow-band imaging, autofluorescence imaging, toluidine blue staining, and microendoscopy. Results: Several noninvasive techniques have shown varying degrees of effectiveness in detecting oral cancer. Autofluorescence imaging exhibited sensitivities up to 100% but had variable specificity. toluidine blue staining reported sensitivity between 77% and 100% for high-risk lesions or cancer, with specificity around 45% to 67%. Spectroscopy techniques achieved 72% to 100% sensitivities and specificities of 75% to 98%. Microendoscopy presented a sensitivity of 84% to 95% and a specificity of 91% to 95%. Conclusion: The review highlights the strengths and limitations of each noninvasive diagnostic method and their recent advancements. Although promising results have been demonstrated, there is a need for further development of reliable strategies for early detection and intervention in oral oncology.

Optical Methods for Brain Tumor Detection: A Systematic Review.

Background: In brain tumor surgery, maximal tumor resection is typically desired. This is complicated by infiltrative tumor cells which cannot be visually distinguished from healthy brain tissue. Optical methods are an emerging field that can potentially revolutionize brain tumor surgery through intraoperative differentiation between healthy and tumor tissues. Methods: This study aimed to systematically explore and summarize the existing literature on the use of Raman Spectroscopy (RS), Hyperspectral Imaging (HSI), Optical Coherence Tomography (OCT), and Diffuse Reflectance Spectroscopy (DRS) for brain tumor detection. MEDLINE, Embase, and Web of Science were searched for studies evaluating the accuracy of these systems for brain tumor detection. Outcome measures included accuracy, sensitivity, and specificity. Results: In total, 44 studies were included, covering a range of tumor types and technologies. Accuracy metrics in the studies ranged between 54 and 100% for RS, 69 and 99% for HSI, 82 and 99% for OCT, and 42 and 100% for DRS. Conclusions: This review provides insightful evidence on the use of optical methods in distinguishing tumor from healthy brain tissue.

Synthesis and multifunctional characterizations of Gd2 O3 and Sm2 O3 modified ZnO nanoparticles

In the present communication multifunctional characterizations suitable for spintronics and memory storage devices are described. Double doped (Gd3+, Sm3+) ZnO nanoparticles are prepared from Sol-Gel method using poly vinyl alcohol (PVA) as chelating agent. The as prepared powders are annealed at 500 °C–1000 °C with a step size of 100 °C. The genesis of single phase hexagonal wurtzite structure, morphological and topographical changes, optical, magnetic and mechanical properties were studied with XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), EDS (energy dispersive spectroscopy), UV- DRS (ultraviolet diffuse reflective spectroscopy), PL (photoluminescence), VSM (vibrating sample magnetometer) and pin on disc tribometer. XRD study untangled the crystallite size and found to be in the range23-50nm. Polycrystalline nanoparticles of spherical geometry with induced porosity is observed from SEM study. The particle size associated with the samples annealed at 500 °C and 900 °C is 24 nm and 27 nm respectively from TEM study. Analyzed the proximity of functional groups, molecular vibrations in the range of 400-4000 cm−1 employing FTIR (Fourier transform infrared spectroscopy). EDS results revealed the stoichiometry of the produced samples. The pronounced optoelectronic applications of Zn1-x Gdx Smx O (ZGS) can be attributed to the large band gap (3.50–3.02 eV) associated with the materials with rise in annealing temperature. The room temperature ferromagnetism was evidenced with double doped ZnO nanomaterials. The wear coefficient, and friction coefficient were evaluated using pin-on-disc tribometer. The utility of materials as solid state lubricants was confiscated from the range of frictional coefficient values (0.067–0.893).

Para-Nitrophenol detection with two-dimensional Binary ZrO2-Nd2O3 nanorods fabricated with PEDOT:PSS onto glassy carbon electrode by electrochemical approach

In this approach, a wet chemical method was employed to synthesize the nanorods (NRs) of Zirconium oxide − Neodymium Oxide (ZrO2-Nd2O3) in an aqueous solution. Comprehensive characterizations encompassing ultraviolet/visible diffuse reflectance spectroscopy (UV/vis DRS), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), alongside field emission scanning electron microscopy (FESEM) equipped with X-ray energy-dispersive spectroscopy (EDS), were applied for optical, elemental, morphological, and structural analyses of resultant material. To fabricate a highly selective and ultra-sensitive electrochemical sensor for para-Nitrophenol (para-NP) in the presence of other interfering toxic chemicals, a glassy carbon electrode (GCE) was modified with a thin layer of ZrO2-Nd2O3NRs. Poly 3,4-ethylenedioxythiophene polystyrene sulfonate (PEDOT:PSS) served as an adhesive conducting binder in this modification process. Subsequently, we introduced a novel electrochemical approach for the first time for the detection of para-NP by making use of newly developed ZrO2-Nd2O3-NRs/PEDOT:PSS/GCE as selective para-NP electrochemical sensor in an aqueous medium. This innovative electrochemical approach exhibited remarkable electrochemical responses, featuring high sensitivity and long-term stability when applied to para-NP detection. The calibration curve demonstrated linearity across broad linear dynamic range (LDR) spanning para-NP concentrations from 0.1 pM to 0.1 mM. Key analytical parameters, including limit of detection (LOD) at signal-to-noise ratio (SNR) of 3, limit of quantification (LOQ), and sensitivity, were determined to be 0.0141 pM, 0.047 pM, and 0.67 μAμM-1cm−2, respectively, based also on the gradient of calibration plot. This sensor holds significant promise for real sample analysis aimed at preserving the natural environment. So, this study introduces a novel and well-structured approach to the development of a highly sensitive para-NP sensor utilizing ZrO2-Nd2O3-NRs/PEDOT:PSS/GCE, employing a reliable electrochemical approach.